Industrial centrifugal backwardly inclined fan ventilators, high temperature fan and blowers, centrifugal and axial fans, roof / wall exhaust and air makeup fans and Canada Blower centrifugal ventilator fans.
BLOWERS DEPOT

Roof Fans

Roof Ventilator Fans

Centrifugal Upblast Power Roof ventilators are designed to exhaust grease-laden air (UL 762) and for general ventilation applications (UL 705). Fan construction features sealed spun aluminum positive ventilation motor compartment, one-piece deep-spun venturi, built in grease trough and drain, aluminum non-overloading centrifugal ventilator wheel.

Centrifugal Downblast Domed Power Roof Ventilators are ideal for ventilation of commercial and institutional buildings. Fan features spun aluminum weather resistant housing with isolated fan-cooled motor-drive compartment. Self aligning regreasable ball bearings are standard.

The low silhouette spun aluminum centrifugal power roof ventilators, and louvered aluminum power roof ventilators are created for low cost general exhaust for a wide range of commercial uses. Both ventilator designs utilize standard variable pitch V-belt drive, adjustable fan motor support base, and non-overloading aluminum wheel, or axial fan prop.

Filtered Air Supply Roof Ventilators are designed to supply untempered make-up air to environments, where vapors, mist, gases, or odors are removed by an exhaust system. Applications include garages, foundries, plants, kitchens, athletic clubs,etc. Fan features weather hood (galvanized, or epoxy coated) with insulation for moisture barrier, forward curved centrifugal blower, or axial prop fan, removable access panel, rubber vibration isolators, and 1” aluminum washable fan filters.

Upblast Axial Power Roof Ventilators are general ventilation units for handling of large volumes of air. A distinctive feature of the fan is leak-proof butterfly damper with watertight sealed base. Wheel again is axial die formed propeller fans, or cast aluminum adjustable pitch airfoil propeller.

Axial Hooded Power Roof Ventilators are high capacity exhaust fans, designed for removal of large volumes of air in warehouses, factories and mills. Fan features weather hood, rain channels and watertight sealed base with spun venturi. Wheel is either die formed fan propeller, or cast aluminum adj. pitch propeller. Bird screens, Insect screens and removable filter packages are optional.

Type RPBC Revirsible (exhaust/supply) Canada Blower Roof Ventilators

APPLICATIONS: American CoolAir Type RPBC ventilators are single units designed for both exhaust and supply. Canada Blower fan unit is elevated above the roof curb, eliminating the possible damper clearance problem, and the backdraft damper should be mounted in the standard roof curb. The unit can also be specified less the fan component for use as a gravity ventilator.

CONSTRUCTION: Canada Blower RPBC PRVs incorporate Style C (belt drive) fan components: adjustable pitch cast aluminum airfoil propeller blades with alternate blades turned 180° and a double orifice attached to the fan panel. The result is essentially equal air movement abilities in either exhaust or supply mode. The exhaust capability is reduced slightly due to air flow restrictions imposed by the hood, even through the propeller performs equally in both directions. To prevent backdraft when the unit is not energized, a center pivoted, motorized damper is recommended. Fan could be reversed for use as air supply, or exhaust ventilator by changing rotation of the fan prop. The motor and drive components are above the roof curb. The ventilators utilize cast aluminum adjustable pitch blade assembly with cast aluminum hub secured to a heavy duty shaft with pillow block ball bearings.

Fan accessories: Prefabricated weather proof roof curbs, pitched to suit the roof slope are available in galvanized steel or aluminum. Automatic and Motor-Operated Backdraft Dampers provide weather protection and prevent backdraft. Aluminum hood, or aluminum hood/stack combination is available for corrosive environment. Side discharge is used for connection to supply / exhaust duct located outside on the roof. Safety Guard, Bird Screen, Insect Screen, or Filter Package are available upon request. Special protective coatings and alloys (aluminum, or stainless) are optional. Pre-wired and loose Safety Disconnect Switch, and Fan Speed Controller are optional.

All models power roof ventilators bear the AMCA Seal.


Call us today: 1-888-763-1800    E-mail: fan@cogeco.net











































































Installation of heavy-duty Industrial ventilators / blowers / fans, Canada Blower Level 3 big industrial fans, super high pressure blowers, New York Blower, Twin City Fan, Aerovent, Chicago Blower, high temperature oven circulation plug ventilators and air kit fans, stainless steel pressure blowers and fiberglass FRP axial fans and centrifugal blowers NYB TCF; IGE, I.L.G., N.Y.B., I.G.E., Twin City,  ige, i.l.g., TCF, Aerovent fans.
Super High Pressure Blowers In-Series: 2 -3 centrifugal blowers in series allow us to reach pressures up to 12 PSIG, depending on the rquired air flow. And un-like rotary lobe PD blowers, multi stage centrifugal blowers or side channel regenerative blowers, Blowers In Series allow us to acheive very high pressure TOGETHER with high temperature of the airflow (up to 600 F), as well as allow some amounts of dust in the airstream .
  Heavy duty and custom built Canadian Blower - Chicago Blower fans; Buffalo Blower - New York industrial ventilators; air handling units; high pressure blowers - centrifugal and axial fan ventilators.
Industrial high pressure turbo blowers, radial fans, regenerative and positive displacement super high pressure blowers. Sales of multi-stage pressure blowers and side channel blowers.

ventilating.com fanblower.com highpressureblower.net industrialblowerfan.com industrialfanblower.net industrialfanblower.com pressureblower.net northernindustrialsupplycompany.com industrialpressureblower.com tenderall.com chicagoblowercanada.com cbblower.com buffaloblower.com buffalofan.com nis-co.com canadianblower.com olegsystems.com canadablower.com abbblower.com acmefan.net industrialblower.net fansandblowers.net americanblower.net barryfan.com cincinnatifan.net canadafans.com barryfan.net pennbarry.net pennfan.net tcffan.com

Pressure Blower 2

Canada Blower FRP Tubeaxial Fans FTX are designed for ventilation and industrial process applications where corrosive fumes may be present in the air stream and/or surrounding atmosphere. All fan parts exposed to the air stream are constructed of high-quality, corrosion-resistant fiberglass reinforced plastic.

Wall Exhaust Fans - Canada Blower AX Series ventilators:
 
- Designed for industrial reliability and quiet efficient operation;
- Sizes from 8" to 84" DIA, up to 100,000 CFM air volumes, exhaust & supply fan configurations;
- Direct drive (low maintnance) and belt drive (adjustable) fan arrangements;
- Easy installation in any type industrial and commercial building;
- Wide range of ventilator accessories: gravity & motorized shutters, wall housings, weather hoods, louvers; disconnect switches, wall sleeves, protective coatings...