Industrial pressure blower ventilators, high temperature fans and blowers, centrifugal and axial fans, roof / wall exhaust and supply fans and power ventilators, centrifugal radial pressure blowers. Power roof and wall ventilators for air supply and exhaust.


Ceiling Fans

CEILING FANS manufactured by experts!

Ceiling Exhauster, or Ceiling Fans are specifically designed for installation above ceilings and in remote locations in today’s modern buildings. Ceiling fans are available as Ceiling Exhausters, Inline Exhausters and Cabinet Fans

Ceiling Fan, Ceiling Exhauster, In-Line Exhauster, and Cabinet Fan Construction: Ceiling fan housing is lined with special sound absorbing glass fiber for maximum sound attenuation. Ventilator housing have adjustable brackets or easy mounting. Dynamically balanced squirrel cage aluminum centrifugal fan impeller insures quiet, and highly efficient operating levels. Rubber motor mounts isolate motor vibration. Motors are permanently lubricated with overload protection. Most fans are shipped from factory in horizontal discharge position. Horizontal, or Vertical fan discharge are standard options. Attractive molded white plastic square and rectangular grills and aluminum grills with baked enamel finish are supplied with all ceiling fans. Build-in dampers cut off the back-draft. As standard units are shipped with right angle discharge. When in-line mode is required access panel and duct flange are easily removable for remounting in the field to switch to IL In-Line arrangement.

Ceiling Fan, Ceiling Exhauster, In-Line Exhauster, and Cabinet Fan Accessories Solid state Controllers provide an infinite number of motor speeds. Thus the need of 2- and 3-speed motors is eliminated completely in the new line of ceiling fans. Roof Jack is supplied with built-in back-draft damper and bird screen. It provides waterproof outlet for sloped roofs. Wall Cap is an all-weatherproof wall outlet. It is also supplied with built-in back-draft fan damper and it is available in bonderized steel and baked enamel finish over aluminum base. Eave elbows are designed for under eave discharge. Built-in back-draft ventilator damper and outlet grille provided with each unit. Fan Vent Caps are intended for roof mount on sloped, or flat roofs. Available in all aluminum construction with mesh galvanized bird screen. In-line adaptor plates provide an inexpensive method for mounting both intake and outlet to duct work of the same size. Grille is discarded and the adaptor plate is used on the fan side.

Ceiling Fan, Ceiling exhauster, Inline exhauster, and Cabinet Fan applicatios Ceiling fans are designed for use as exhaust fans for all types of commercials and administartive buildings predominantly for indoor applications.

All models wall fans bear the AMCA Certified Ratings Seal.

Call us today: 1-888-763-1800    E-mail:

Ceiling fans   Ceiling ventilators

Industrial suppliers for pneumatic conveying blowers, corrugated materal handling fans, radial wheel blowers, high pressure radial ventilators, paper trim handling fans, industrial combustion OEM blowers, high pressure blowers in series, dryer fans, paint booth ventilators, roof exhaust ventilators, huge fans,
emergency exhaust fans, mancoolers, oven fans, high RPM blowers, high speed centrifugal blowers, Twin City utility sets, ventilating sets, high CFM ventilators, large wheel ventilators, narrow pressure blowers, all stainless steel ventilators,metal conveying fans. Quick supply of idustrial axial fans, air circulation ventilators, warehouse ventilators, high volume ventilation fans, hot air ventilation fans, industrial exhaust fans, portable industrial blowers, garage ventilators, PRV roof fans, explosion proof pressure blowers, wall ventilators, fan wheel blades, combustion pressure blowers, pvc ventilators, ID fans, FD fans, force draft ventilators, induse draft blowers, propylene & FRP PVC ventilators, spark-resistant blowers, sealed ventilators, dust collector ventilators & fans.
HOODED ROOF MOUNT FANS are suitable for industrial supply or exhaust fan applications. These units are suitable for a variety of applications, including general ventilation, moisture-laden air, heat or smoke fumes, and mild contaminates in the airstream. 

Industrial hooded roof mount fans offer aerodynamically superior performance constructed with a heavy duty welded steel base and aluminum hood with bird screen. Some models include the hood and base made of galvanized steel for rigidity, long life and years of protection against corrosion. A finish coat of epoxy can be requested.

               Flow volume up to 106,000 CFM               
up to 3/4'' Static Pressure

BELT DRIVE: Available in sizes from 24 inch to 84 inch. Belt driven models are designed for quieter operation and lower initial cost. They use standardly available 1750 RPM motors.

HOODED ROOF MOUNT FANS have a large removable panel for access to the fan and backdraft  damper. The curb cap and support system is of heavy gauge steel for strength and rigidity. Painted parts are coated with epoxy to provide a protective coating rated excellent for hardness, impact resistance, adhesion and chemical resistance.

DIRECT DRIVE: Available in sizes from 10 inch to 60 inch. Direct driven models require less maintenance, offer longer operating life, increased efficiency and reduced operating cost.

Following accessories are available:
HOODED FILTERED SUPPLY ROOF MOUNT FANS are furnished with two-inch thick,
permanent, cleanable filters. The filters are easily mounted into the filter rack when the unit
is installed at the job site. Fan component shall be of welded steel construction, PRV hood and base shall be of galvanized steel.

REVERSIBLE HOODED ROOF MOUNT FANS are single units designed for both exhaust and supply. This type of reversible fan includes adjustable pitch cast aluminum airfoil propeller blades with alternate blades turned 180° and a double orifice attached to the fan panel. The result is essentially equal air movement abilities in either exhaust or supply mode. Flow volume up to 42,000 CFM @ up to 3/4'' Static Pressure.

Please call or email us for an appropriate selection of HOODED ROOF MOUNT FANS !

With such a wide range of performance there is a standard Canada Blower compact pressure blower model to meet every requirement without lengthy times or custom pricing. Put Canada Blower experience and "Industrial Quality" fan / blower building experience to work for you.

BC Pressure Blowers are designed for high-pressure, 􀀀industrial-process applications. All
applications can be handled in either induced-draft or forced-draft configurations. Numerous
modifications and accessories make the BC Pressure Blower suitable for a wide range of systems.
This high capacity product utilizes a high efficiency, backward curved wheel to achieve flows to
80,000 CFM and pressures to 110" and temperatures to 800 degrees. BC Pressure Blowers are
available in sizes 24" to 73", Arr. 1, 4, and 8 in 7 discharge positions.
􀀀Standard high efficiency, BC Pressure Blower Fans for clean air and light particulate-laden
• Single-thickness, backward-curved wheel constructed of high-strength, low alloy steel for
dependable operation in moist or light particulate-laden airstreams.
• Wheel sizes from 24” to 73” blade diameters.
• Capacities to 80,000 CFM, pressures to 110” WG, Temperatures to 800°F.
• Mechanical efficiency to 84%.
• Integral-base construction eliminates the need for field erection of independent bearing pedestals
and sole plates.. complete factory-assembled units up to Size 73 are test run and balanced prior to
• Available in clockwise and counterclockwise rotations in any of seven standard discharge
BC Pressure Blower wheels is a rugged, all-welded wheel designed for clean air applications but
capable of handling light 􀀀particulate-laden or moist airstreams. Air-handling efficiencies of the BC
Pressure Blower Fans are higher than common radial fans and, therefore, offer 􀀀lower noise levels.